|
RoboFlagger® Automated Flagger Assistance
Device
 The
RoboFlagger® AFAD is a portable flagging station. It removes the traditional
human flagger from the road while providing motorists with clear guidance
through a temporary work zone. Additionally, the RoboFlagger AFAD reduces
labor costs and limits liability and exposure for personnel.
- One person controls the work zone
- Each remote control operates one device, eliminating any risk of communications failure
- Infrared sensor prevents gate arm from descending on an obstruction
- Functionality can be configured easily to meet changing conditions at the
job site
- Approved and listed on the MUTCD
RoboFlagger brochure
Trailer Specifications
- Length: 120"
- Width (travel): 68½"
- Height (travel): 79"
- Height (deployed): 12'-7"
- Height to center of red LED: 138½"
-
Weight: 1400 lbs.
- Construction: Steel sheet metal and tubular steel forming a unibody style
construction; MIG-welded for maximum strength
- Finish: Durable oven-baked powder coat
- Drawbar: Comprises tow hitch with 2" ball (pintle and/or combo-hitch
optional); removable for theft protection
and shipping
Signal Housing and Operator Indicator Lights
- 12" red and amber LED signal lights indicate stop
or proceed with caution
- Motorist signal lights are 118" from ground
- 75% coverage tunnel visor
- Louvered backboard
surrounds signal housing for added visibility of signal indicators; yellow
reflective tape covers backboard perimeter
- Two 4" amber LEDs on back of signal housing indicate to the operator which
motorist signal light is lit
Power System
- Battery bank supplies power to all electrical components; batteries recharge
with an onboard battery charger and optional solar panel
- Four 6VDC golf-cart-type batteries are wired for 12V power
- Battery capacity: 225AH @ 20-hr. rating, 450AH total capacity
- Battery
size: GC2
- Optional solar panel mounts to top of trailer body in anti-theft brackets
- Max. solar power: 85W, 17.4V, 5.02A
- Max. system voltage: 600V
Electronics
- The PLC is a complete self-contained system that controls all functions.
The CPU, power supply, and I/O are all enclosed in the same housing. Optional
modules expand the PLC capability. Custom programming is available for special
applications.
- The 4-line operator interface display panel is connected to the PLC. It
can display up to 160 predefined “messages,” which reside in panel memory.
The predefined messages allow for custom “fine tuning” to the
individual job requirements.
Contact us for model numbers and ordering information.
|
|
